Welcome to your new Saniwerke Jumbo Haven Lounger—a spacious, handwoven hammock chair designed for ultimate relaxation. To ensure safe and correct assembly, please follow this guide step-by-step before your first use.
Package Contents
- 1x Handwoven Hammock Chair
- 2x Support Legs
- 4x Curved Rods
- 2x Hanging Rods
- 1x Middle Connecting Rod
- 1x Middle F-Block A (with pre-embedded nut)
- 1x Middle F-Block B (with central through bore)
- Hardware Kit (Bolts, Washers, Lock Nuts, S-Hooks, Carabiners, Chains, Eye Bolts, Hex Key)
Assembly Instructions
Step 1: Assemble the Central Hub
- Place a soft cloth on your work surface to protect the wood.
- Insert the Middle Connecting Rod through the central bore of Middle F-Block B.
- Thread the rod into the pre-embedded nut of Middle F-Block A.
- Secure the connection with the provided hardware, but do not fully tighten any bolts yet.
Step 2: Attach the First Side Frame
- Take 2 Curved Rods and connect them to one end of the Middle Connecting Rod.
- Use M10x10mm bolts (2), washers (4), and lock nuts (2) as shown in the manual.
- Important: The side of the curved rod with the countersunk hole (for hiding the bolt head) must face outward.
- Do not fully tighten the nuts at this stage.
Step 3: Attach the Second Side Frame
- Repeat Step 2 with the remaining 2 Curved Rods on the opposite end of the Middle Connecting Rod.
- Again, ensure the countersunk holes face outward and do not fully tighten the hardware.
Step 4: Install the Support Legs
- Secure the pre-assembled frame to the left and right Support Legs.
- Use M10x10mm bolts (4), washers (8), and nuts (4).
- Note: The support legs are designed to appear slightly inclined inward for structural stability.
- Keep all connections loose for now.
Step 5: Install the Hanging Rods
- Attach the 2 Hanging Rods to the top of the frame on both sides.
- Use M10x10mm bolts (4), washers (8), and lock nuts (4).
- Ensure the countersunk holes on the hanging rods face outward.
- All bolts should still be left loose.
Step 6: Final Assembly & Hanging
- Install the eye bolts (2), washers (4), and lock nuts (2) on both sides of the top frame.
- Hang your handwoven hammock chair using the S-hooks, carabiners, and chains.
- Adjust the suspension height with the chains until it is comfortable.
- Final Check: Once everything is in place, tighten all nuts and bolts securely. Inspect every connection to ensure the structure is firm, stable, and safe for use.
Critical Safety Information
- Weight Limit: Maximum 400 lbs (180 kg). For one adult only.
- Installation: Mount the base on level ground only. Secure the stand with the included ground stakes on grass or soil.
- Usage: Do not swing more than 8 inches (20 cm) forward/backward. Side-to-side swinging is prohibited.
- Safety: Never allow children to climb or play on the lounger. It is not a toy.
- Inspection: Check all ropes and joints for fraying or loose knots before each use.
▶ Jumbo Haven Lounger Instructions (PDF, 1.43MB)
▶ Assembly steps video：
